金滙首飾 Goldenway Jewellery Accessories

名稱:

18K金珍珠戒指

品牌:

2-73R #6

型號:

V030293R-005

原價:

$128

簡介:

18K鍍金立方氧化鋯珍珠戒指

材料：金屬基和鑲嵌材料
單位重量：0.02 KG / 1件

18k gold plating cubic zirconia fashion ring

Materials : Metal base and Inlay materials
Unit Weight : 0.02 KG / 1 Pieces

戒指尺寸表 :

當心！確保你的手指大小，然後再訂購戒指。如果你不知道關於你的手指大小，您可以使用我們的“手指尺寸表”圖表為指導。如果購買給朋友，只要透過電話要他或她做步驟 1和2。用一把尺子來量度長度，你便可以使用我們的“戒指尺寸表”中找到相對大小＃匹配的長度。如果您沒有找到完全匹配的大小＃一樣的長度，請選擇總是以一個尺寸而可調較的，因此不會因太小而穿不上。

第一步：剪切直線條的大小紙張大約 3英寸（長）* 1 / 2英寸（寬。

第二步：在你的手指環繞此紙條一周。放置一個標記在紙條最終。

第三步：將標記的“X”這個手指大小的圖表打印出來。擴展紙條，

放在戒指尺寸表，在紙條的尾部“＃”表示正確的手指大小。

特別注意事項:

請參考我們的“戒指尺寸表”為國際尺碼對照表為不同大小的標準。

戒指尺寸表：

戒指尺寸（美國）	環內徑（毫米）	測量周長（毫米）
#6	16.5	(50-50.5)
#7	17.3	(53-53.5)
#8	18.2	(56-56.5)
#9	18.9	(59-59.5)

Ring Size Chart

Beware! Always make sure your finger size before you place ring order. If you are not sure about your finger size‚ you can use our "Finger Sizer" chart for a guide. If buying for a friend‚ just ask him or her to do the step 1 and 2. Use a ruler to get the length over the phone. You can than use our "Ring Size Table" to find the relative size # match the length. If you do not find the size # match exactly the same as the length‚ always order one size up‚ so it will not get too small to wear.

Step1: Cut a straight strip of paper about the size of 3 inches (long)* 1/2 inch (wide).
Step2: Warp around your finger with this paper strip. Place a mark where the end meets the paper strip.
Step3: Place the mark on the "X" of this finger size chart just print out. Extend the paper strip‚ the "# "indicates at the end of the paper strip is the correct finger size.

Special Notes
Refer to our "Ring Size Table" for international size conversion chart for different sizing standard.
HERE'S HOW To MEASURE YOUR RING SIZE

Ring Size table :
HERE'S Ring size table

Ring size (US)

Ring inner diameter(mm)

Measured circumference(mm)

#6

16.5

(50-50.5)

#7

17.3

(53-53.5)

#8

18.2

(56-56.5)

#9

18.9

(59-59.5)